2-Port NitroAV 6Gb/s SATA III (Internal) PCI Express x1 (Gen 2) Host Adapter

PCIe Host Bus

• PCI Express 2.0 endpoint device
• Compliant with PCI Express 2.0 specifications
• Supports communication speed of 2.5 Gbps and 5.0 Gbps
• Supports IDE programming interface registers for the SATA controller and the ATA/ATAPI controller.
• Supports AHCI programming interface registers for the SATA controller
• Supports aggressive power management
• Supports error reporting, recovery and correction
• Supports Message Signaled Interrupt (MSI)

SATA Features

• Compliant with Serial ATA Specification 3.0
• Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
• Supports programmable transmitter signal levels
• Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i
• Supports ATA and ATAPI commands
• Supports two SATA Ports
• Supports AHCI 1.0 and IDE programming interface
• Supports Native Command Queuing (NCQ)
• Supports Port Multiplier FIS based switching or command based switching
• Only supports one SATA Port multiplier
• Supports AES-256
• Supports Partial and Slumber Power Management states

• Supports ATA/ATAPI-7 specification, supports ATA and ATAPI commands
• Supports DMA protocols, and up to UDMA 150 MBps data transfer rate
• Supports Multiword DMA and PIO modes for data transfer
• Supports Master and Slave operations from a single port
• Supports IDE programming interface

• Two SATA Ports
• One PATA Port